Australia's number one supplier of  DIY Wireless Alarm Systems  Wireless Detectors  Wireless Sirens

7/ Remote Access: Phone in to the panel from anywhere in the world to arm or disarm any part of the system – allow the gardener access to the garage only, - allow the cleaning lady access to the downstairs only etc. Listen in or have a conversation during an alarm. Helpful if a member of the family triggers the alarm by mistake. You can hear what’s going on and disarm the system from your mobile phone.

Forgot to arm the system this morning? No problems, just dial in to the system from your mobile phone and away you go. Need to let the landscape gardeners in at 2:00pm but don’t want to leave the gates open, no problems. Just tell them to call you when they arrive, and you’ll open the gates for them remotely.

8/ System Supervision: All wireless peripherals within the protected site are constantly supervised for: 1/ Alarm, 2/ Tamper, 3/Low battery and 4/ Fail to Communicate.

9/ Latchkey Mode: An automatic “Latchkey” message is sent to chosen telephones if the system is disarmed by a latchkey user (a junior family member for example). It’s nice to know when the children get home from school. You can even program the system to say their name – "David - system disarmed".

10/ Message Exchange: Before leaving the premises, you may record a short verbal message for other users of the system who may arrive later. Or, phone in from work and leave a message – I’ll be home at 8:00pm tonight.

11/ Built in rechargeable backup battery: The system comes with an in-built rechargeable backup battery, which is connected to mains power via a plug pack. In the event of a power failure the backup battery will keep the system running for a period of 45 hours (this time can be increased to 90 hours with an additional battery pack). When the power is returned the panel will automatically recharge the battery. Loss of mains power will be automatically reported to either – the central station control room or private phone numbers. You can select how long you want the system to wait before it reports a power failure from 5mins up to 3 hours. This can be useful if you have a lot of power failures in your area.  You don't want the alarm system to dial you every time the power fails for just a few seconds or minutes.  Remember, the alarm has a backup battery that will keep it operating for up to 20 hours without power.

12/ Wireless Siren: When we say wireless we mean wire-less. No cabling at all. No external power supplies, no solar panels. Just screw it up and away you go! Both the wireless internal siren and wireless external siren provide different sounds for different events – burglary, fire and emergency, as well as arm and disarm beeps (customer selectable).

13/ Phone Line Disconnection: Similar to the power failure feature in item 13/, you can select how long the panel waits and who it contacts (providing you have a GSM module installed of course).