30 Day Money Back Guarantee - 5 Year New For old Warranty - 1300 Helpline
Outdoor Wireless Camera Detector( Manufacturer ) |
 View Full-Size Image |
|
AU$478.50 (including 10 % tax)
|
|
|
Description The Outdoor MotionViewerTM Camera DCV is a battery operated, wireless outdoor motion activated camera designed for use in VIDEOFIED® security systems. Motion-activated cameras are intended for applications where video verification of intrusion alarms is necessary or desired. The DCV consists of a digital camera, a passive infrared motion detector, and S2 VIEW spread spectrum, VIDEOFIED® interactive, encrypted wireless cicuitry for secure two way communications with the control panel. The camera consists of a CMOS black and white sensor and an 85 degree, wide angle lens. Two infrared LED provide a night illumination distance of approximately 8 meters/26 feet. For motion or movement detection, a Fresnel lens inside the cover captures a 12m/40 ft wide, 90 degree angle passive infrared pattern. The base can be fixed on wall directly or by using mounting. A tamper function provides cover tamper detection. The camera is typically installed to cover outdoor applications where there is a temperature fluctuation and areas where broad viewing/detection coverage is needed. When the alarm system is armed and the motion detector senses motion or movement, the detector transmits a signal and activates the camera, which captures a 10 second digital video segment. The control panel recieves the signal and responds according to system configuration/programming. The alarm and video segment are reported via the control panel to the central monitoring station, and can also be sent to an Email address for viewing. The detector is powered by three lithium batteries that can last two years or more, depending on the amount of detector activity. The detector transmits a check-in signal every eight minutes that includes its unique identification code along with the current detection sensor state, tamper condition, serial number, date of manufacture, software revision, and battery status.
Features > S2View® - Spread Spectrum, VIDEOFIED®, Interactive AES Encrypted Wireless technology provides optimum signal integrity and security. > Camera - CMOS black and white sensor with 85 degree wide angle lens and video resolution of 320 x 240 pixels. > Supervised - transmits a check-in/status signal every 8 minutes indicating tamper state and battery status. > Tamper - Provides cover tamper detection. > Lithium batteries - up to two years. > Night illumination - up to 8 meters/26 feet distance using two infrared LED. > Motion detector - Dual-element, passive infrared with Fresnel lens for 12m/40 ft. wide 90 degree coverage. > Camera begins filming in fewer than 100 milliseconds after the PIR detects motion. > Camera is fully waterproof and can withstand temperatures from -20 degrees to 60°C (-10°/+140°F). Applications > Outdoor video verification of intrusion alarms. Electrical Data Power requirements Three 3.6 V batteries Battery type Lithium, LS14500 Battery life Up to 2 years RF technology S2View® Radio type Spread Spectrum Bidirectional Operating frequency 868/915/920 MHz Transmission security AES encryption algorithm Supervision Polled signal every 8 minutes Antenna Integrated Tamper detection Cover tampered Camera sensor type CMOS black and white Camera resolution 320 x 240 pixels Camera sensitivity 0.2 lux Camera lens Wide angle 85 degrees Camera response Less than 100 milliseconds Video sequence in intrusion 5 frames/s for 10 seconds Night illumination 2 infrared LED Night illumination switching Automatic Night illumination distance 8 m/26 ft. Motion detector technology Passive infrared DSP Motion detector type Dual element Motion lens Fresnel Motion Detection angle 90° Motion Detection distance 12 m/40 ft. Motion Detection pattern 24 facets 9 main-12 m/ 40 ft. 8 intermediate-8 m/ 26 ft. 5 short-4 m/13 ft. 2 creep zones-1.2 m/4 ft. Operating temperature -20°/+60°C (-10°/+140°F) Maximum relative humidity 95%, non-condensing Approvals CE / EN50131 / EN300220 / IDA (DCV250) FCC (DCV650) A-Tick (DCV750) Physical Data Material Polycarbonate UL94 Dimensions 101.6 mm x 88.9 mm x 114.3 mm (LxWxD): 4 in. x 3 1/2in. x 4 1/2 in. Weight 260.8 g/9.2oz. (without batteries) Installation/Mounting Unit/Base Has a single thread for Gimble Mount (Sold Seperate) Mounting height 2.1 m/6.9 ft.
|
|
Customer Reviews:There are yet no reviews for this product.Please log in to write a review. |
|
|
|
|
